![background image](http://html2.mh-extra.com/html/icom/ic-v80/ic-v80_instruction-manual_3761314008.webp)
2
PANEL DESCRIPTION
2
■
Front, top and side panels
q
PTT SWITCH [PTT]
➥
Hold down to transmit, release to receive. (p. 14)
For IC-V80E only
➥
Quickly push
[PTT]
once, then immediately hold
down
[PTT]
again for 1 or 2 seconds, to transmit a
1750 Hz tone burst signal. (p.
w
ANTENNA CONNECTOR
Connect an antenna here. (p. 1)
e
CONTROL DIAL [VOL]
➥
Adjust the audio level. (p. 11)
➥
While in the Set mode, or Initial Set mode, rotate to
select the desired item, option or value.
r
EXTERNAL SPEAKER/MICROPHONE JACKS [SP MIC]
Accepts an optional speaker-microphone, plug
adapter cable or cloning cable connector. The inter-
nal microphone and speaker will not function when
an option is connected.
CAUTION:
Be sure to turn OFF the transceiver
power, before connecting or disconnecting option-
al equipment to or from the
[SP/MIC]
jack.
t
MONITOR KEY [MONI]
➥
Hold down to temporarily open the squelch to
monitor the operating frequency. (p. 11)
➥
While holding down the key, push
[
Y
]
or
[
Z
]
to
adjust the squelch level. (p. 11)
➥
Enters or sends the DTMF code ‘A.’
y
POWER KEY [ ]
Hold down for 1 second to turn the power ON or
OFF.
u
UP/DOWN KEYS [
Y
]/[
Z
]
➥
Push to change the operating frequency. (p. 13)
➥
In the memory mode, push to select a memory
channel. (p. 22)
➥
While scanning, push to change the scanning di-
rection. (pp. 26, 32)
➥
While holding down
[MONI]
, push to adjust the
squelch level. (p. 11)
➥
While in the Set mode, or Initial Set mode, push to
select a setting item. (pp. 36, 40)
➥
[
Y
]
enters or sends the DTMF code ‘B.’
➥
[
Z
]
enters or sends the DTMF code ‘C.’
i
VFO/MEMORY/CALL KEY [VFO/MR/CALL]
➥
Push to sequentially select the VFO mode, memory
mode, a Call channel or a weather channel*. (p. 12)
*For only USA version of IC-V80.
➥
After pushing
[FUNC](
M
)
, push to enter the mem-
ory programming mode. (p. 21)
➥
After pushing
[FUNC](
M
)
, hold down for 1 sec-
ond to transfer a channel’s contents to a memory
channel, or to the VFO mode. (p. 23)
➥
Enters or sends the DTMF code ‘D.’
q
w
e
r
t
y
u
i
Function
display (p. 4)
Microphone
Speaker