![background image](http://html2.mh-extra.com/html/icom/ic-v80/ic-v80_instruction-manual_3761314009.webp)
3
D
KEYPAD
➥
While in the VFO mode, push to enter numbers for
enter numbers for
frequency input.
frequency input.
➥
While in the memory mode, push to enter numbers to
enter numbers to
select a
select a memory channel.
memory channel.
➥
Push to enter or send a DTMF code. (pp. 33, 34)
➥
To activate the second function of a key, fi rst push
[FUNC](
M
)
, and then push the key.
[1] • [ TONE](1)
➥
Numeric input and DTMF code: ‘1’
nput and DTMF code: ‘1’
➥
After pushing
[FUNC](
M
)
, selects a Tone func-
tion. (p. 31)
[2] • [VOX](2)
➥
Numeric input and DTMF code: ‘2’
nput and DTMF code: ‘2’
➥
After pushing
[FUNC](
M
)
, turns the VOX func-
tion ON or OFF*. (p. 49)
*
Only when an optional headset and plug
adapter are connected.
[3] • [T.SCAN](3)
➥
Numeric input and DTMF code: ‘3’
nput and DTMF code: ‘3’
➥
After pushing
[FUNC](
M
)
, starts a tone scan.
[4] • [DUP](4)
➥
Numeric input and DTMF code: ‘4’
nput and DTMF code: ‘4’
➥
After pushing
[FUNC](
M
)
, selects minus du-
plex, plus duplex, or simplex operation. (p. 18)
[5] • [SCAN](5)
➥
Numeric input and DTMF code: ‘5’
nput and DTMF code: ‘5’
➥
After pushing
[FUNC](
M
)
, starts a scan.
[6] • [SKIP](6)
➥
Numeric input and DTMF code: ‘6’
nput and DTMF code: ‘6’
➥
After pushing
[FUNC](
M
)
, sets or cancels the
skip setting. (p. 28)
[7] • [PRIO](7)
➥
Numeric input and DTMF code: ‘7’
nput and DTMF code: ‘7’
➥
After pushing
[FUNC](
M
)
, starts a priority
watch. (p. 29)
[8] • [SET](8)
➥
Numeric input and DTMF code: ‘8’
nput and DTMF code: ‘8’
➥
[FUNC](
M
)
, enters the Set mode.
(p. 36)
[9] • [H/M/L](9)
➥
Numeric input and DTMF code: ‘9’
nput and DTMF code: ‘9’
➥
After pushing
[FUNC](
M
)
, selects high, mid or
low output power. (p. 15)
[0] • [DTMF-M](0)
➥
Numeric input and DTMF code: ‘0’
nput and DTMF code: ‘0’
➥
After pushing
[FUNC](
M
)
, enters the DTMF
memory mode. (p. 33)
[
M
] • [FUNC](
M
)
➥
DTMF code: ‘
DTMF code: ‘
M
(indication: E)’ ’
➥
Push to access the second function of other
keys.
[# ENT] • [
](# ENT)
➥
DTMF code: ‘
DTMF code: ‘
#
(indication: F)’’
➥
After entering a frequency, push to save it.
➥
Push to exit the Set mode or Initial Set mode.
➥
After pushing
[FUNC](
M
)
, hold down for 1 sec-
ond to turn the Key Lock function ON or OFF.
(p. 15)
2
PANEL DESCRIPTION