![background image](http://html2.mh-extra.com/html/icom/ic-v80/ic-v80_instruction-manual_3761314024.webp)
18
■
Duplex operation
D
Setting the frequency offset
q
Push
[FUNC](
M
)
, and then push
[SET](8)
to enter
the Set mode.
w
Push
[
Y
]
or
[
Z
]
to select the frequency offset item.
•
“±” and decimal point “.” blink, and the current frequency
offset appears.
e
Rotate
[VOL]
to set the desired frequency offset.
•
The offset is set in the same step as the frequency tuning step.
•
The unit of the frequency offset is “MHz.”
r
Push
[# ENT]
to exit the Set mode.
D
Setting the duplex direction
➥
Push
[FUNC](
M
)
, and then push
[DUP](4)
to select
the offset direction.
•
The “–” (negative offset) or “+” (positive offset) icon ap-
pears to represent the frequency offset direction.
•
“–” or “+” blinks when the Reversed Duplex function is ON.
For only USA version of IC-V80:
The Auto Repeater function has priority over the manual
duplex setting. If the transmit frequency changes after set-
ting, the Auto Repeater function may have changed the
duplex setting. Turn OFF the Auto Repeater function to
prevent this.
D
Reversed Duplex function
When the Reversed Duplex function is ON, the receive
and transmit frequencies are reversed.
q
Push
[FUNC](
M
)
, and then push
[SET](8)
to enter the Set
mode.
w
Push
[
Y
]
or
[
Z
]
to select the Reversed Duplex func-
tion item (REV).
e
Rotate
[VOL]
to turn the function ON or OFF.
r
Push
[# ENT]
to exit the Set mode.
•
“–” or “+” blinks when the Reversed Duplex function is
ON.
Each receive and transmit frequency is shown in the
table below, with the following confi gurations:
Input frequency : 145.300 MHz
Direction
: – (negative)
Offset
: 0.6 MHz
5
REPEATER AND DUPLEX OPERATIONS
Reversed
RX frequency
TX frequency
OFF
145.300 MHz
144.700 MHz
ON
144.700 MHz
145.300 MHz
(0.6 MHz offset is selected.)
• The “Offset” item in the Set mode
While receiving
While transmitting
Duplex
+ (positive)
– (negative)
• Example— When the frequency offset is 0.6 MHz
• “–” or “+” blinks when the Reversed Duplex function is ON.
Appears
• Setting the shift direction of the transmit frequency