background image

25

Previous view

  Programming channel names

Each memory channel and the Call channel can be pro-
grammed with an alphanumeric channel name, for easy 
recognition. Names can be a maximum of 5 characters.

D

 Setting the display type

q

  Hold down 

[ ]

 for 1 second to turn OFF the power. 

w

  While holding down 

[

Y

]

 and 

[

Z

]

, turn ON the power  

to enter the Initial Set mode.

e

  Push 

[

Y

]/[

Z

]

 to select the display type item. (dSP)

r

  Rotate 

[VOL]

 to select “dSP.nm.”

t

  Push 

[# ENT]

 to exit the Initial Set mode.

D

 Programming a channel name

q

  Select the channel name display in the Initial Set mode. 

(See the above topic.)

w

  Push 

[VFO/MR/CALL]

 several times to select the memory 

mode or Call channel mode.

 

• For memory channel: 

 

   Push 

[

Y

]

 or 

[

Z

]

 to select the desired memory channel.

e

   Push 

[FUNC](

M

)

, and then push 

[SET](8)

 to enter 

the channel name programming mode.

 • 

 

A cursor blinks for the fi rst character.

r

  Rotate 

[VOL]

 to select a character.

 

• The selected character blinks.

t

  Push 

[

Y

to move the cursor right, push 

[

Z

]

 to move 

the cursor left.

y

  Repeat steps 

r

 and 

t

, until the desired channel 

name is completed.

u

  Push 

[# ENT] 

to exit the programming mode.

D

 Selectable characters

(J)

(W)

(0)

( I )

(V)

(9)

(A)

(n)

(1)

( + )

(H)

(U)

(8)

:

 )

(C)

(P)

(3)

( = )

(F)

(S)

(6)

( ( )

(G)

(t)

(7)

( ) )

(d)

(q)

(4)

 )

(k)

(X)

(L)

(y)

(m)

(Z)

(b)

(O)

(2)

( - )

(E)

(R)

(5)

/

 )

(Space)

(“Name” is selected)

• The “Display type” item in the Initial Set mode

(Memory mode)

Push           or           to select channel 12.

Push       , and then push        .

 [i.e.]: Programming “CALL” into memory channel 12.

Rotate 

[VOL]

 to select the character,

and then push         or          to move the cursor.

Repeat until the name is complete.

Push        to exit the programming mode.

6

MEMORY/CALL OPERATION

Summary of Contents for IC-V80




























































Reviews: