![background image](http://html2.mh-extra.com/html/icom/ic-v80/ic-v80_instruction-manual_3761314026.webp)
20
■
Lockout function
This function helps prevent interference to other stations
by inhibiting transmitting when a signal is received. The
transceiver has two inhibiting conditions; repeater and
busy.
q
Hold down
[ ]
for 1 second to turn OFF the power.
w
While holding down
[
Y
]
and
[
Z
]
, turn ON the power
to enter the Initial Set mode.
e
Push
[
Y
]
or
[
Z
]
to select the lockout item (RLO).
r
Rotate
[VOL]
to select the Lockout function option of
“RP,” “bU” or “OF
.
”
•
“RLO.OF” :
The Lockout function is OFF.
•
“RLO.RP” :
The transmit is inhibited when a signal
with an un-matched subaudible tone is re-
ceived.
•
“RLO.bU” :
Transmit is inhibited when a signal is re-
ceived.
r
Push
[# ENT]
to exit the Initial Set mode.
■
Auto Repeater function
The USA version automatically activates the repeater
settings (DUP– or DUP+ and tone encoder ON/OFF),
when the operating frequency falls within the general
repeater output frequency range. It deactivates them
when outside of the range.
q
Hold down
[ ]
for 1 second to turn OFF the power.
w
While holding down
[
Y
]
and
[
Z
]
, turn ON the power
to enter the Initial Set mode.
e
Push
[
Y
]
or
[
Z
]
to select the Auto Repeater item (RPt).
r
Rotate
[VOL]
to set the Auto Repeater function to
“R1,” “R2” or “OF.”
• “RPt.OF”
: The Auto Repeater function is OFF.
•
“RPt.R1”
:
The Auto Repeater function is ON (For only
duplex).
•
“RPt.R2”
:
The Auto Repeater function is ON (For du-
plex and tone encoder).
t
Push
[# ENT]
to exit the Initial Set mode.
5
REPEATER AND DUPLEX OPERATIONS
Frequency range
Duplex direction
145.200–145.495 MHz
146.610–146.995 MHz
“–” appears.
147.000–147.395 MHz
“+” appears.
(The Repeater Lockout function is ON. )
(The Repeater Lockout function is OFF. )
(The Busy Lockout function is OFF. )
• The “Lockout” item in the Initial Set mode
• Frequency range and offset direction
Auto Repeater function is OFF.
Auto Repeater function is ON
(For only duplex).
Auto Repeater function is ON
(For duplex and tone encoder).
• The “
Auto repeater
” item in the Initial Set mode
Only USA version of IC-V80