![background image](http://html2.mh-extra.com/html/icom/ic-v80/ic-v80_instruction-manual_3761314019.webp)
13
■
Selecting passband width
Set both the transmission and reception passband width
to wide or narrow.
q
Push
[FUNC](
M
)
, and then push
[SET](8)
to enter
the Set mode.
w
Push
[
Y
]
or
[
Z
]
to select the passband width item
(W/n).
e
Rotate
[VOL]
to select the passband width.
•
“W”
:
Wide (FM mode).
•
“n” :
Narrow (FM-N mode).
r
Push
[# ENT]
to exit the Set mode.
■
Selecting a tuning step
The transceiver has 8 tuning step options;
• 5 kHz
• 10 kHz • 12.5 kHz • 15 kHz
• 20 kHz • 25 kHz • 30 kHz
• 50 kHz
The tuning step can be selected in the Set mode.
q
Push
[FUNC](
M
)
, and then push
[SET](8)
to enter
the Set mode.
w
Push
[
Y
]
or
[
Z
]
to select the tuning step item (tS).
e
Rotate
[VOL]
to select the desired tuning step.
r
Push
[# ENT]
to exit the Set mode.
■
Setting a frequency
D
Using [
Y
]
or
[
Z
]
q
If necessary, push
[VFO/MR/CALL]
several times to
select the VFO mode.
w
Push
[
Y
]
or
[
Z
]
to set a frequency.
•
The frequency changes according to the selected tuning
step.
D
Using the keypad
q
If necessary, push
[VFO/MR/CALL]
several times to
select the VFO mode.
w
To enter the desired frequency, enter 6 digits, start-
ing from the 100 MHz digit.
•
Entering two or three* to fi ve digits, and then pushing
[# ENT]
,
also sets the frequency. (*Depending on the transceiver
version)
•
If the entered frequency is outside of the frequency range,
the previously displayed frequency is automatically recalled.
(20 kHz is selected)
• The “Tuning step” item in the Set mode
(FM mode is selected)
• The “Passband width” item in the Set mode
(FM-N mode is selected)
Push
Push
• Example 1— entering 145.525 MHz
• Example — selecting 145.040 MHz
• Example 2— entering 144.800 MHz
Push .
(When the selected tuning step is 20 kHz.)
Push .
4
BASIC OPERATION