11
SET MODE
11-5
Connectors
Phones Level Rmtio
(Default: 1.00)
Sets the output ratio of the speaker output level and
headphones output level.
• Range: 0.40 ~ 2.00
AF/IF >
Output Select
(Default: AF)
Selects the signal output from [AF/IF].
•
AF: The demodulated AF signal is output.
•
IF: A 12 kHz IF signal is output.
L
You can listen to the Digital Radio Mondiale (DRM)
broadcast with an application software receiver if it
is installed into your PC.
AF/IF >
AF Output Level
(Default: 50%)
Sets the AF output level of [AF/IF].
•
Range: 0 ~ 100%
L
At 50% (default), the output level is 200 mV (RMS).
AF/IF >
AF SQL
(Default: OFF (OPEN))
Selects whether or not to output the audio from [AF/IF],
according to the squelch and signal levels.
•
OFF(OPEN): The squelch is always opened regardless
of the squelch and signal levels.
•ON:
The squelch opens and closes, according
to the squelch and signal levels.
AF/IF >
AF Beep/Speech... Output
(Default: OFF)
Sets the Beep and Speech audio output status of [AF/IF]
.
•
OFF: The beep and speech audio are not output
from [AF/IF].
•ON: The beep and speech audio are output from
[AF/IF].
AF/IF >
IF Output Level
(Default: 50%)
Sets the IF output level of [AF/IF].
•
Range: 0 ~ 100%
L
At 50% (default), the output level is 200 mV (RMS).
USB (Front) >
Output Select
(Default: AF)
Selects the signal output from [USB] on the front panel.
•
AF: The demodulated AF signal is output.
•
IF: A 12 kHz IF signal is output.
L
You can listen to the Digital Radio Mondiale (DRM)
broadcast with the application software receiver that
is installed into your PC.
USB (Front) >
AF Output Level
(Default: 50%)
Sets the AF output level of [USB] on the front panel.
•
Range: 0 ~ 100%
MENU
» SET >
Connectors
USB (Front) >
AF SQL
(Default: OFF (OPEN))
Selects whether or not to output the audio from [USB] on
the front panel, according to the squelch and signal levels.
•
OFF(OPEN): The squelch is always opened regardless
of the squelch and signal levels.
•ON:
The squelch opens and closes, according
to the squelch and signal levels.
USB (Front) >
AF Beep/Speech... Output
(Default: OFF)
Sets the Beep and Speech audio output status of
[USB] on the front panel.
•
OFF: The beep and speech audio are not output
from [USB] on the front panel.
•ON: The beep and speech audio are output from
[USB] on the front panel.
USB (Front) >
IF Output Level
(Default: 50%)
Sets the IF (12 kHz) output level of [USB] on the front
panel.
•
Range: 0 ~ 100%
USB (Front) >
Seriml Function
(Default: FSK Decode)
Selects the signal output from [USB] on the front panel.
•
FSK Decode: An FSK decoded signal is output.
•D-STAR Data: A D-STAR data is output.
USB (Front) >
FSK Decode Bmud Rmte
(Default: 9600)
Selects the data transfer rate (Baud rate) of decoded
FSK signals from [USB] on the front panel.
•
Options: 4800, 9600, 19200 or 38400 (bps)
USB (Front) >
D-STAR Dmtm Bmud Rmte
(Default: 9600)
Selects the data transfer rate (Baud rate) of decoded
D-STAR data from [USB] on the front panel.
•
Options: 4800 or 9600 (bps)
USB (Rear) >
Output Select
(Default: AF)
Selects the signal output from [USB] on the rear panel.
•
AF: The demodulated AF signal is output.
•
IF: A 12 kHz IF signal is output.
L
You can listen to the Digital Radio Mondiale (DRM)
broadcast with the application software receiver that
is installed into your PC.
USB (Rear) >
AF Output Level
(Default: 50%)
Sets the AF output level of [USB] on the rear panel.
•
Range: 0 ~ 100%
L
At 50% (default), the output level is 200 mV (RMS).
