9
SCANS
9-5
∂
F scan
∂
F scan and Fine
∂
F scan
100 kHz
100 kHz
93.3 MHz
93.4 MHz
93.2 MHz
Repeatedly scans within the
∂
F span area.
The scan starts from the center frequency of VFO or
selected memory channel.
L
In fine
∂
F scan, the scan speed decreases
when the squelch opens, but the receiver keeps
scanning. The scan tuning step changes to 10 Hz
when the squelch opens.
D
∂
F scan operation
1. Select the VFO or Memory mode, then set the
center frequency of the scan.
2. Open the SCAN screen.
MENU
»
SCAN
3. Touch [
TYPE/SET
].
4. Touch [
∂
F].
5. Touch [SELECT] to select the item, then rotate
to change the setting.
•Set the center frequency and span.
L
The scan does not start when the tuning step is wider
than the span.
6. Touch [SELECT] several times to exit the edit
mode, then touch [START] or hold down
for
1 second. to start the
∂
F scan.
L
To cancel the scan, touch [STOP] or push
.
7. To close the SCAN screen, push
EXIT
.
D
Fine
∂
F scan operation
1. Start the
∂
F scan.
L
See steps 1 ~ 6 in “
∂
F scan operation” to the left for
details.
2. While
∂
F scanning, touch [FINE].
• Each touch toggles the
∂
F scan and the Fine
∂
F scan.
L
To cancel the scan, touch [STOP] or push
.
3. To close the SCAN screen, push
EXIT
.
While
∂
F
scanning
While Fine
∂
F scanning
Blinks
Blinks
Blinks
Recalls the VFO
frequency before
the scan starts
Jumps to the lower edge
SCAN screen
(Example) Span: 100 kHz
Start
Jump
Lower
edge
Upper
edge
Center
frequency
