9
SCANS
9-9
Mode select memory scan
Setting the skip frequency
Repeatedly scans the selected receive mode (ignoring
other modes) while memory scanning, except
Programed Scan Edge channels
(P00A/P49A ~ P00B/
P49B)
.
D
Setting the receive mode
1. Select the receive mode.
2. Open the SCAN screen.
MENU
»
SCAN
3. Touch [TYPE/SET].
4. Touch [MODE].
5. Touch [SELECT] to select the item, then rotate
to change the setting.
•Set the channel group and edge channels.
L
You cannot change the receive mode on this screen.
6. Touch [SELECT] several times to exit the edit
mode, then touch [START].
•The mode select memory scan starts.
L
“MODE SELECT MEMORY SCAN” and decimal
points blink while scanning.
•Touch [STOP] to cancel the scan.
7. To close the SCAN screen, push
EXIT
.
You can set a frequency as a skip frequency that is
skipped (ignored) during a VFO scan*.
* Programmed scan, Fine Programmed scan, Auto Write Memory
scan,
∂
F scan and Fine
∂
F scan
D
Setting the skip frequency
z
Hold down
for 1 second while a signal is
received and the scan is paused.
• The frequency is stored as the Scan Skip channel (S00
~ S99).
L
The “PSKIP (Program SKIP)” is displayed on the skip
channel.
L
During a VFO scan, the skip frequency is not skipped.
D
Canceling the skip frequency
1. Touch the memory channel number.
2. Touch [SKIP].
L
Each touch changes between “SKIP,” “PSKIP” and
“(no icon).”
L
"PSKIP" disappears and the skip setting is cancelled.
3. To close the VFO/MEMORY screen, push
EXIT
.
SCAN screen
Blinks
Deactivated
during a Memory
scan
VFO/MEMORY screen
99ch
WFM
WFM
00ch
01ch
02ch
03ch
WFM
AM
WFM
WFM
WFM
AM
AM
WFM
04ch
05ch
06ch
50ch
98ch
(Example) Group: ALL (Each channel is in the different group.)
All modes except the
WFM are skipped.
