11-2
Tone Control
Function
MENU
» SET > Tone Control >
FM
HPF/LPF
(Default: – – – – – – – – –)
Sets the receive audio high-pass filter and low-pass
filter cutoff frequencies in 100 Hz steps.
Selectable ranges:
•
HPF: 100 ~ 2000 Hz
•
LPF: 500 ~ 2400 Hz
Bmss
(Default: 0)
Treble
(Default: 0)
Sets the bass or treble level of the receive audio.
•
Range: –15 ~ +15
De-Emphmsis(50k)
(Default: OFF)
De-Emphmsis(15k)
(Default: ON)
De-Emphmsis(7k)
(Default: ON)
Turns the de-emphasis circuit ON or OFF for each
bandwidth of filter (50k/15k/7k).
•
OFF: The de-emphasis circuit is turned OFF.
•ON: The de-emphasis circuit is turned ON for the
selected band width.
MENU
» SET > Tone Control >
WFM
Bmss
(Default: 0)
Treble
(Default: 0)
Sets the bass or treble level of the receive audio.
•
Range: –15 ~ +15
MENU
» SET > Tone Control >
AM/SSB/CW/FSK/
D-STAR/P25/dPMR/NXDN/DCR
HPF/LPF
(Default: – – – – – – – – –)
Sets the receive audio high-pass filter and low-pass
filter cutoff frequencies in 100 Hz steps.
Selectable ranges:
•
HPF: 100 ~ 2000 Hz
•
LPF: 500 ~ 2400 Hz
Bmss
(Default: 0)
Treble
(Default: 0)
Sets the bass or treble level of the receive audio.
•
Range: –15 ~ +15
MENU
» SET >
FUNCTION
Beep Level
(Default: 50%)
Sets the beep output level.
•
Range: 0 ~ 100%
L
If the “Beep (Confirmation)” item is set to “OFF,” no beep sounds.
Beep Level Limit
(Default: ON)
Selects whether or not to limit the volume up to the
specified level.
•
OFF: Does not limit the volume level.
•ON: Limits the volume level.
Further rotation of
does not increase
the level.
Beep (Confirmation)
(Default: ON)
Turns the Confirmation beep ON or OFF.
•
OFF: Does not sound a beep.
•
ON: Sounds the beep when a key is pushed.
L
If the “Beep Level” item is set to “0%,” no beep sounds.
SPEECH >
SPEECH Lmngumge
(Default: English)
Selects the speech language.
•English: Speech in English.
•Japanese: Speech in Japanese.
SPEECH >
SPEECH Speed
(Default: Fast)
Selects the speech speed.
•
Slow: Speech speed is slow.
•
Fast: Speech speed is fast.
SPEECH >
S-Level SPEECH
(Default: ON)
Turns the S-meter level announcement ON or OFF.
•
OFF: When you push
, the frequency and
receive mode is announced.
•
ON: When you push
, the S-meter level,
frequency and receive mode are announced.
SPEECH >
MODE SPEECH
(Default: OFF)
Turns the receive mode announcement ON or OFF.
•
OFF: The receive mode is not announced.
•
ON: The receive mode is announced when you
change the receive mode.
SPEECH >
SCAN SPEECH (mt Receive Pmuse)
(Default: OFF)
Turns the frequency announcement ON or OFF.
•
OFF: The frequency is not announced.
•
ON: When a signal is received during a scan, the
frequency and receive mode is announced.
L
If the “S-Level SPEECH” item is set to “On,” S-Meter level
is also announced.
11
SET MODE
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
