Installation and Connections
• Top side installation
• Top side installation
• Top side installation
• Top side installation
①
Remove the 1 screw (M4
×
8) from both side of
the MB-78.
②
Remove the handles from bottom bar. And turn
the handles upside down, then replace the
handles right side and left side.
⑤
Remove the 2 screws (M4
×
8) from both side of
the side panel (front-end).
⑥
Attach the MB-78 to the top side of the repeater.
Then tighten the 1 supplied screws (M4
×
8) and
2 removed screws to each side. (6 screws at
total)
21
③
Attach the handles to the bar, then tighten the
screws.
④
The completed MB-78 should look like below
⑦
The top side installation should look like below.
⑧
Turn the repeater upside down, then removing the
4 legs for mounting the 19 inch rack.
