3-1-1
Functions Programmable to [PROG] Key
Key Assign
Key Assign
Key Assign
Key Assign
Dealer programmable key [PROG] can be programmed
for one of several functions (see below).
Programmable Key Assign
Programmable Key Assign
Programmable Key Assign
Programmable Key Assign
•
Null
Null
Null
Null
- No function.
•
Prio A
Prio A
Prio A
Prio A
•
Call A (code 30) (PMR)
Call A (code 30) (PMR)
Call A (code 30) (PMR)
Call A (code 30) (PMR)
- Transmits the 5Tone codes using TX code channels
30 for a station code.
•
Call B (code 29) (PMR)
Call B (code 29) (PMR)
Call B (code 29) (PMR)
Call B (code 29) (PMR)
- Transmits the 5Tone codes using TX code channels
29 for a station code.
•
Emergency Single/Repeat
Emergency Single/Repeat
Emergency Single/Repeat
Emergency Single/Repeat
- Transmits an emergency call once or repeatedly.
* The emergency channel is specified in the Memory
CH screen (CH Atr column).
•
TX Code (PMR)
TX Code (PMR)
TX Code (PMR)
TX Code (PMR)
- Push to select a station code using [CH UP]/[CH DN]
keys.
- Push and hold to enter the selected code and
change the contents of the code.
* The contents of the TX Code can be updated in the
TX Code CH screen when the [Update] function is
selected.
•
ID
ID
ID
ID----MR Select (PMR)
MR Select (PMR)
MR Select (PMR)
MR Select (PMR)
- Push to recall the received 5-tone or ID code. Use
[CH UP]/[CH DN] keys for selection.
* Up to 10 IDs can be memorized. Push and hold this
or [ANI CLR] key to erase the received ID on display.
13
•
Prio A
Prio A
Prio A
Prio A
- Selects priority channel A.
•
Prio A (Rewrite)
Prio A (Rewrite)
Prio A (Rewrite)
Prio A (Rewrite)
- Push to select priority channel A. Push and hold to
re-assign priority channel A.
•
Disp Select
Disp Select
Disp Select
Disp Select
- Push to select the display indication on normal
operating mode.
Normal indication -> W/N indication -> TX frequency
indication -> RX frequency indication -> DISPLAY OFF
indication.
- Push and hold to recall the received DTMF code. Use
[CH UP]/[CH DN] keys for selection.
* Up to 10 codes can be memorized. Push and hold
[ANI CLR] key to erase the received code on display.
•
Lock
Lock
Lock
Lock
- Turns the lock function ON and OFF.
•
High/ Low
High/ Low
High/ Low
High/ Low
- Changes the output power from the independent
settings of each channel.
•
Wide/Narrow
Wide/Narrow
Wide/Narrow
Wide/Narrow
- Each channel can be set to wide/narrow for both
receive IF bandwidth and transmitter modulation.
•
Call (PMR)
Call (PMR)
Call (PMR)
Call (PMR)
- Transmits the 5Tone code on the selected channel.
•
Call (LMR)
Call (LMR)
Call (LMR)
Call (LMR)
- Transmits the 2Tone code on the selected channel.
or [ANI CLR] key to erase the received ID on display.
•
Scrambler
Scrambler
Scrambler
Scrambler
- Push to toggle the Scrambler function ON or OFF.
* Sets the Scrambler code number on Memory
Channel screen in advance.
▒ NOTE:
NOTE:
NOTE:
NOTE:
▒ This setting is only effective for the base mode.
•
Sp. Func 1/2
Sp. Func 1/2
Sp. Func 1/2
Sp. Func 1/2
- Reserved for future function.
Scrambler Code
Scrambler Code
Scrambler Code
Scrambler Code
- Program the scrambler codes.
Available codes;
UT-109 (Non-rolling type) : 1 to 32
UT-110 (Rolling type) : 1 to 255
NOTE:
NOTE:
NOTE:
NOTE:
- Set the scrambler group code in the Common 2
screen in advance. (UT-110 only)
- UT-110 can be program the group number 1 to 4.
Then totality 1020 (4 group * 255) code numbers
are available.
- Set the scrambler type in the Common 2 screen. By
selecting Non-rolling type in this item, you can use
UT-110 as UT-109.
- This setting is only effective for the base mode.
RELATED ITEMS:
RELATED ITEMS:
RELATED ITEMS:
RELATED ITEMS:
•
Synchronous capture :Common 2 screen (UT-110
only)
•
Tone Start Timing :Common 2 screen (UT-110 only)
