Basic Setup of Cloning Software
Programming information
Programming information
Programming information
Programming information
• We recommend that you should read out all the
repeater’s data before start entering/editing
parameters even if the repeater is factory fresh. This
avoids rare glitches which might cause programming
errors when writing back the altered parameters.
•
CS-FR3000 has 2 model types. You can select the
desired model type which you are going to clone. LMR
(2Tone) or PMR (5Tone) is available. The Tree View
screen content will be changed when the model type is
switched.
• Double-click on the desired memory channel, or right-
click the cell then click [Edit Memory …]
[Edit Memory …]
[Edit Memory …]
[Edit Memory …] to enter the
memory channel program screen.
• Select the model type which you are going to clone
from; LMR (2Tone) and PMR (5Tone).
NOTE:
NOTE:
NOTE:
NOTE:
PMR
PMR
PMR
PMR
LMR
LMR
LMR
LMR
Edit Memory…
Enter
______________________________________
Prio A
Emergency
Emergency OFF
______________________________________
Copy
Ctrl+C
Paste
Ctrl+V
______________________________________
Clear
Delete
Delete
Insert
Insert
Edit menu
29
NOTE:
NOTE:
NOTE:
NOTE:
The model type must be selected at first, otherwise the
edited contents will be lost.
✔
LMR (2Tone)
PMR (5Tone)
Memory channel
program screen
