background image

The Family Radio Service Story

A1

The Family Radio Service Story

Ever wish you could talk to someone who wasn’t
within earshot? Like contacting ski partners back
at the lodge? Or letting a friend know how to find
you in a busy mall? Cobr a’s MicroTalk 3 is a great
way for friends or family to increase their f u n – a n d
s a fe ty – by staying in touch while on the go.

The FCC (Federal Communications Commission)
has created 14 license free frequency bands ,
or channels, called Family Radio Service (FRS) 
frequencies. All of these 14 channels are easily
accessed on your Cobra FRS radio. These chan-
nels are in the UHF (Ultra High F requency) band
which means great penetration through build-
ings, thick forests, hills, and other dense structures.
They are also FM (Frequency Modulation) signals
which means crystal clear reception even in
crowded noisy environments.

FCC Warnings

Replacement or substitution of transistors, regular
diodes or other parts of a unique nature, with
parts other than those recommended by Cobra,
may cause a violation of the technical regulations
of part 95 of the FCC Rules, or violation of Type
Acceptance requirements of Part 2 of the Rules .

Included with your MicroTalk 3

1.

Removable Belt Clip

2.

Wrist Strap

Family Radio Service
2 Way Radio

O pe rating Instru ctions for yo u r
Co b ra Mi c ro Talk 3 

“Ingenious Prod u cts for Easier Co m m u n i cat i o n .”

Cobra Electronics Corporation
6500 West Cortland Street
Chicago, IL60707

Cobra Electronics Corp.© 1998
Printed in Thailand

Part No. 480-280-P-001

2

1

For te c h n i cal assistance, please call our Au to m a ted Help Desk which can assist 

you by answe ring the most fre q u e n t ly asked questions about Co b ra prod u ct s.

(773) 889-3087 

24 hours a day, 7 days a week.

A Consumer Service Representative can be reached through this same number 

8:00 am - 8:00 pm,Monday through Friday, CST.

Technical assistance is also available on-line in the Frequently Asked Questions (FAQ)

section at www.cobraelec.com or by e-mail to [email protected]

If you think you need service call 1.773.889.3087

“If your product should require factory service please call Cobra first before sending your unit in.
This will ensure the fastest turn-around time on your repair

.”

You may be asked to send your unit to the Cobra factory. It will be necessary to furnish the follo w-
ing in order to have the product serviced and returned.
1. For Warranty Repair include some form of pr oof-of-purchase, such as a mechanical reproduction

or carbon or a sales receipt . If you send the original receipt it cannot be returned .

2. Send the entire product.

3. Enclose a description of what is happening with the unit. Include a typed or clearly print name

and address of where the unit is to be returned.

4. Pack unit securely to pr event damage in transit. If possible, use the original packing material.

5. Ship prepaid and insured by w ay of a traceable carrier such as United Parcel Service (UPS) or First

Class Mail: to avoid loss in transit to: Cobra Factory Service, Cobra Electronics Corporation,6500
W. Cortland St., Chicago, IL 60707.

6. If the unit is in war ranty, upon receipt of your unit it will either be repaired or exchanged

depending on the model. Please allow approximately 3 to 4 weeks before contacting us for 
status. If the unit is out of war ranty a letter will automatically be sent informing you of the 
repair charge or replacement charge. If you have any questions, please call 1.773.889.3087 for
assistance.

If You Think You Need Service

FRS300.MANUAL.qx  10/2/98 12:39 PM  Page 1

Summary of Contents for Micro Talk 3




























Reviews: