![background image](http://html2.mh-extra.com/html/icom/ic-7100/ic-7100_instruction-manual_3605333085.webp)
7
D-STAR INTRODUCTION
7-4
Previous view
“MY” (Your own call sign) programming
Convenient!
✓
If necessary, enter a note of up to 4 characters, such as
the model of the transceiver, name, area name, and so
on, after your call sign.
Touch [
q
](
D
) one or more times until the cursor
moves to the right of the “/”.
Repeat steps
w
t
and
y
on the page 7-3 to enter a
desired 4 character note.
(Example:
7100)
Touch
SET
Appears
Touch the entered call sign to set the call sign to be
o
used.
!0
Push
SET
(
C
) to exit the Set mode.
2. Enter the Call Sign (Continued)
The
L
,
R
,
C
or
D
in the
instructions indicate the
part of the controller.
L
: Left side
R
: Right side
C
: Center bottom
D
: Display (Touch panel)
L
eft
R
ight
C
enter
D
isplay
Important!
✓
To use a repeater gateway, you must register your call
sign with a gateway repeater, usually one near your
home location.
If needed, ask the gateway repeater administrator for
call sign registration instructions.
Touch the
call sign
( Example:
1:JA3YUA)