6
FUNCTIONS FOR TRANSMIT
6-9
Previous view
Split frequency operation (Continued)
Direct frequency shift input
D
The frequency shift can directly be entered.
Touch the MHz digits to enter the Band selection dis-
q
play.
Touch [F-INP](
w
D
) to enter the Direct input screen.
If the Shift direction is minus, touch “• (–).”
e
•
[SPLIT] changes to [–SPLIT], and displays the Minus set-
ting mode.
Touch the desired number to enter the desired fre-
r
quency shift.
• –9.999 to +9.999 MHz can be set in 1 kHz steps.
Touch [SPLIT] or [–SPLIT](
t
D
) to input the frequency
shift to the transmit frequency, and the Split function
is turned ON.
[Example]
To transmit on a 10 kHz higher frequency:
Touch [1], [0] then [SPLIT].
➥
To transmit on 1.025 MHz lower frequency:
Touch [• (–)], [1], [0], [2], [5] then [–SPLIT].
➥
The
L
,
R
,
C
or
D
in the
instructions indicate the
part of the controller.
L
: Left side
R
: Right side
C
: Center bottom
D
: Display (Touch panel)
L
eft
R
ight
C
enter
D
isplay
• Direct input screen
Minus (–) input
Delete entering
Enter the Split off-
set
Cancel edit
Shows the input
digits
Touch the MHz
digits.
Touch [F-INP]