![background image](http://html2.mh-extra.com/html/icom/ic-7100/ic-7100_instruction-manual_3605333146.webp)
14
VOICE MEMORY FUNCTION
14-11
Previous view
The transceiver starts to record the transmitted audio
when the [PTT] switch is pushed.
After transmitting, when the transceiver receives a sig-
nal in a given amount of time, it also records the re-
ceived audio. Therefore, you can record all communica-
tion audio using this function.
Push
q
SET
(
C
) to enter the Set mode.
Touch the “PTT Auto REC” item of the “Voice Memo”
w
Set mode.
(
Voice Memo > QSO Recorder > Recorder Set >
PTT Auto REC
)
•
If the specifi ed item is not displayed, touch [
∫
] or [
√
](
D
)
one or more times to select the page.
Touch “ON.”
e
•
OFF
:
The transceiver does not start to record when the
[PTT] switch is pushed.
•
ON :
The transceiver starts to record when the [PTT]
switch is pushed.
Push
r
SET
(
C
) to exit the Set mode.
NOTE: When you set PTT AUTO REC to ON, see
the notes below.
• The transceiver also starts to record audio when
the optional microphone’s [PTT] switch is pushed,
transmitting using the VOX function or the CI-V re-
mote controller.
• All transmit audio is recorded.
(
When “RX Only” is set in the “REC Mode” item,
transmit audio is not recorded)
• When the transceiver receives a signal less than
10 seconds after transmitting, the transceiver also
records the receive audio.
• In addition, when the transceiver receives a signal,
and then receives other signals less than 10 sec-
onds later, it records all signals audio.
Start to record when the [PTT] switch is pushed
SET
The
L
,
R
,
C
or
D
in the
instructions indicate the
part of the controller.
L
: Left side
R
: Right side
C
: Center bottom
D
: Display (Touch panel)
L
eft
R
ight
C
enter
D
isplay
Touch
“ON.”
Touch
“PTT Auto REC.”
Touch
“Voice Memo.”
Touch
“QSO Recorder.”
Touch
“Recorder Set.”