![background image](http://html2.mh-extra.com/html/icom/ic-7100/ic-7100_instruction-manual_3605333091.webp)
11
MEMORY OPERATION
11-3
Previous view
Selecting in the VFO mode
D
Touch the Memory channel number indication once
q
or twice to select the VFO mode. (p. ??-??)
Rotate [BANK](
w
L
) to select a Memory bank that
contains the channel you want to select.
Rotate [M-CH](
e
L
) to select a Memory channel num-
ber.
•
Rotate clockwise to select a higher Memory channel
number; rotate counterclockwise to select a lower Mem-
ory channel number.
•
All Memory channels, including blank channels, can be
selected.
•
“BLANK” appears when no information has been pro-
grammed into the Memory channel. (Blank channel)
•
You can do either step
r
or
t
fi rst.
NOTE:
When the PBT indicator lights green, or
the RIT indicator lights orange, push [M-CH](
L
)
to turn OFF the indicator fi rst, and then rotate it.
Touch the Memory channel number indication to se-
r
lect the Memory mode.
• “MEMO” and the Memory channel contents appear.
Selecting in the Memory mode
D
Touch the Memory channel number indication once
q
or twice to select the Memory mode. (p. ??-??)
Rotate [BANK](
w
L
) to select a Memory bank that
contains the channel you want to select.
Rotate [M-CH](
e
L
) to select a Memory channel num-
ber.
•
Rotate clockwise to select a higher Memory channel
number; rotate counterclockwise to select a lower Mem-
ory channel number.
•
All Memory channels, including blank channels, can be
selected.
•
“BLANK” appears when no content has been programmed
into the Memory channel. (Blank channel)
•
Memory channels can also be selected using the micro-
phone [UP]/[DN] keys. In such case, the blank channels
are skipped.
While in the VFO mode
While in the Memory mode
Appears
Appears
Appears
Outer: [BANK]
Inner: [M-CH]
Selecting a Memory channel
The
L
,
R
,
C
or
D
in the
instructions indicate the
part of the controller.
L
: Left side
R
: Right side
C
: Center bottom
D
: Display (Touch panel)
L
eft
R
ight
C
enter
D
isplay