![background image](http://html2.mh-extra.com/html/icom/ic-7100/ic-7100_instruction-manual_3605333137.webp)
14
VOICE MEMORY FUNCTION
14-2
Previous view
The Voice Memory function records a QSO (communi-
cation) audio onto the SD card.
This function enables you to record both received and
transmitted audio, a QSO with a DX’pedition, and play-
back the recorded audio after the QSO.
NOTE:
Be sure to insert an SD card into the trans-
ceiver before recording a QSO audio.
To start recording
D
Push
q
QUICK
(
C
) to open the Quick Menu screen.
Touch the “<<REC Start>>” item to start voice re-
w
cording.
•
Touch [
√
](
D
) one or more times to select the desired
page.
•
The transceiver displays “Recording started” and auto-
matically exits the Quick Menu screen.
•
“ ” appears while the recording is paused.
•
“ ” appears and “ ” and “ ” alternately blink while record-
ing.
•
Recording is continuous until you manually stop record-
ing, or the card becomes full.
•
If the recording fi le’s content reaches 2GB, the transceiv-
er automatically creates a new fi le, and continues record-
ing.
NOTE:
Once recording has started, it will continue,
even if the transceiver is rebooted.
Recording a QSO audio
QUICK
While recording
While pausing
Touch
“<<REC Start>>”
The
L
,
R
,
C
or
D
in the
instructions indicate the
part of the controller.
L
: Left side
R
: Right side
C
: Center bottom
D
: Display (Touch panel)
L
eft
R
ight
C
enter
D
isplay
Convenient!
✓
When the PTT Automatic Recording function is set to
ON, the recording automatically starts when [PTT] is
pushed. (p. ??-??)
( Voice Memo > QSO Recorder > Recorder Set >
PTT Auto REC
)
To stop recording
D
Push
q
QUICK
(
C
) to open the Quick Menu screen.
Touch “<<REC Stop>>” to stop voice recording.
w
•
Touch [
√
](
D
) one or more times to select the desired
page.
•
The transceiver displays “Recording stopped,” and auto-
matically exits the Quick Menu screen.
Touch
“<<REC Stop>>”