![background image](http://html2.mh-extra.com/html/icom/ic-7100/ic-7100_instruction-manual_3605333011.webp)
1
PANEL DESCRIPTION
1-7
Previous view
@2
SPEECH/LOCK SWITCH
SPEECH
❍
SPEECH KEY Operation (p. 45)
Push to audibly announce the S-meter level, the
displayed frequency and the operating mode.
•
The S-Level announcement can be turned OFF in the
“S-Level SPEECH” item of the “SPEECH” Set mode.
(p. 164)
SET
> SPEECH >
S-Level SPEECH
• When RIT is ON, the RIT offset is not included in the
frequency announcement.
❍
LOCK KEY Operation (p. 77)
Hold down for 1 second to turn the Lock function
ON or OFF.
•
The function electronically locks the Dial.
•
“
” appears when the function is ON.
•
The function can be select the Dial lock and Panel
lock in the “Lock Function” item of the “Function” Set
mode. (p. 164)
SET
> Function >
Lock Function
NOTE:
The [SPEECH/LOCK] switch operation to
activate the voice synthesizer or the Lock func-
tions can be replaced in the “[SPEECH/LOCK]
Switch” item of the “Function” Set mode. (p. 164)
SET
> Function >
Lock Function
@3
MEMO PAD KEY
MPAD
(p. 144)
Push to sequentially call up the contents from the
➥
memo pads.
The 5 (or 10) most recently programmed frequen-
cies and operating modes can be recalled, start-
ing from the most recent.
•
The memo pad capacity can be increased from 5 to
10 in the “Memopad Numbers” item of the “Function”
Set mode (p. 164)
SET
> Function >
Memopad Numbers
Hold down for 1 second to write the displayed
➥
data into a memo pad.
•
The 5 most recent entries remain in the memo pads.
@4
MAIN DIAL
Rotate to change the displayed frequency, select the
Set mode settings, and so on.
@5
MAIN DIAL TENSION LATCH
Select the Dial drag.
•
Three positions are selectable. The upper side setting
turns on clicks as the dial is turned.
Front panel (Controller) (Continued)
PBT
RIT
TX / RX
PWR
AF
RF/SQL
CLR
M-CH
BANK
RIT
TUNER/CALL
MENU
MIC/RF PWR
NB
SPEED/PITCH
SET
QUICK
NOTCH
DR
AUTO TUNE RX
➔
CS
XFC
SPEECH
MPAD
NR
P.AMP ATT
i7100
@2 @3
@4
@5