12
SCAN OPERATION
12-16
Previous view
The receive frequency and the operating mode setting
Set the priority channel (Example: A05)
QUICK
[BANK]/
[M-CH]
Select the VFO
mode
Select the
Memory mode
Touch
“PRIO Watch ON”
While Priority
scanning
VFO frequency and a priority channel
Checks the selected priority channel every 5 seconds,
while receiving on a VFO frequency.
Touch the Memory channel number indication once
q
or twice to select the VFO mode. (p. ??-??)
Set the receive frequency and the operating mode.
w
(p. ??-??)
Touch the Memory channel number indication to se-
e
lect the Memory mode. (p. ??-??)
Rotate [BANK] or [M-CH]
r
(
L
) to set the priority
channel.
•
Memory channel, Call channel or Program Scan Edge chan-
nel can be selected as the priority channel.
Push
t
QUICK
(
D
) to open the Quick Menu window.
Touch “PRIO Watch ON” to start the Priority scan.
y
•
The VFO mode is automatically selected, and
PRIO
ap-
pears.
•
To cancel the Priority scan, touch “PRIO Watch OFF” in
the Quick Menu window.
When a signal is received on the priority channel
The Priority channel is automatically selected, and
PRIO
blinks on the screen.
• The scan pause timer and resume settings are the same
as for a normal scan.
Priority scan au-
tomatically paus-
es.
NOTE:
When the VFO mode is selected, you can normally
operate the transceiver; the operating frequency set-
ting, the scanning operation and so on.
The
L
,
R
,
C
or
D
in the
instructions indicate the
part of the controller.
L
: Left side
R
: Right side
C
: Center bottom
D
: Display (Touch panel)
L
eft
R
ight
C
enter
D
isplay
To start the Programmed scan during the
Priority scan, touch [SCAN] in the “M-1”
(Menu 1) screen, and then touch [PROG].