Previous view
42
10
POCKET BEEP AND TONE SQUELCH
Tone scan
By monitoring a signal that is being operated with the
pocket beep, tone or DTCS Squelch function turned
ON, you can determine the tone frequency or DTCS
code necessary to open the squelch.
q
Set the channel to be checked for a tone frequency
or code.
w
Push
[TONE]
several times to select the tone type
to be checked.
• One of the icons “ ,” “ ” or “ ” appear.
e
Hold down
[T-SCAN]
(TONE) for 1 second to start
the tone scan.
•
Rotate
[DIAL]
to change the scanning direction.
r
When the CTCSS tone frequency or DTCS code is
detected, the squelch opens and the detected tone
frequency is temporarily programmed into the mem-
ory or Call channel.
•
The scan pauses when a CTCSS tone frequency or
DTCS code is detected.
•
The detected CTCSS tone frequency or DTCS code
is used for the tone encoder or decoder, depending
on the tone condition or type selected in step
w
.
- No icon : Cannot be used for operation.
-
“ ”
: CTCSS tone encoder
-
“ ”+“ ” : DTCS tone encoder
-
“ ”
: CTCSS tone encoder/decoder
-
“ ”
: DTCS tone encoder/decoder
t
Push
[V/MH z]
to cancel the scan.
Using the HM-133V
z
Set the channel to be checked for a tone frequency.
x
Select the tone type to be checked.
•
Push
[FUNC]
then push;
[TONE]
for repeat-
er tone;
[TSQL]
for tone squelch;
[DTCS]
for
DTCS squelch.
c
Push
[FUNC]
then
[T-SCAN]
to start the
tone scan.
v
When the tone frequency is matched, the squelch
opens and the tone frequency is programmed into
the selected memory or Call channel.
b
Push
[CLR]
to cancel the scan.
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
V/ MHz
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
V/ MHz
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
V/ MHz
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
V/ MHz
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
During CTCSS tone scan
Push
[TONE]
one or more times to select the tone type.
Hold down
[T-SCAN]
(TONE) for 1 second.
Appears
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
V/ MHz
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
V/ MHz
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
V/ MHz
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
V/ MHz
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
During CTCSS tone scan
Push then to select the tone type.
Push then .
Appears
[i.e.]:
Checking for the tone frequency on the
145.680 MHz.
[i.e.]:
Checking for the tone frequency on the
145.680 MHz.
scan
About this Instruction Manual (PDF format)
These Instruction Manual describe the details of the IC-2300H’s features. And, this PDF formatted manual provides
you with convenient functions, as follows.
Move to the previously read page.
Click [Previous view] at the left top on an each page, to
move back to the previously read page.
Shows a term description
When the mouse cursor is moved over a term which
is highlighted in yellow, the description of term is dis-
played.
Shows the location of keys
When the cursor is moved over a term with a red un-
derline, a red circle appears around the appropriate
key(s) on the fi gure of HM-133V.
Example: When the cursor is moved over
[CLR]
in
the description, a red circle appears around
the appropriate key(s).
The screen shots at the right column, correspond to
the operating instructions and procedures shows both
setting and operating example.
INTRODUCTION
