iColor I Candy 200, User Manual

Page: 18 / 72

|
17
User Manual – February 2020 Edition
E. Set the present/cut mode
The stock sensor mode refers to the method the printer will use to detect the print starting position for each label.
To adjust the stock
Use the Present/Cut Mode to adjust how the printer presents labels after they are printed or if/when they are cut
after printing. To adjust the Present/Cut Mode, open the IColor PrintHub program.
1. Connect the printer via USB and turn on the power. The Output/Cut Mode Setting is stored on the printer
main board, so you will not be able to access it unless the printer is turned on and properly communicating with
the computer.
2. Go to Start - Programs – UniNet IColor Technology – IColor 200 PrintHub.
3. Click on the Label Feed Tab.
4. Click on the Output/Cut Mode button.
There are different options available which change if the Cutter is enabled or disabled. If the Cutter is disabled, the
label present options will be available. If the Cutter is enabled the present options are no longer available but cut
options become available.
Cutter Options
Cut After Button Press
This setting will cut after you press the Load/Feed button on the printer. This can be used after one label or an
entire job. This feature is useful if you will not be present at the end of the print to catch the cut label.
Cut after label count
This option will cut after the number of labels specified in the toggle box that appears when this option is selected.
This is useful if you have front/back labels or sets of labels.
Cut after no activity
This setting will cut at the end of a print job if the printer does not receive another print job within one second of
the last print job in the queue. You can use this feature to cut at the end of multi-copy job, multi-page job or
multiple individual jobs in the queue.
Cut every label
This setting will cut after every label.