iColor I Candy 200, User Manual

Page: 13 / 72

|
12
User Manual – February 2020 Edition
2.
Lower the Roll Guide and pull it outward to make room for your label stock
.
3. Remove any shipping tape from your label stock roll to ensure that it can unroll freely, making certain that no
adhesive portion is exposed. It is important to note that any exposed adhesive surface can attach itself to the
inner workings of the print mechanism and cause a media jam.
4. Place your roll of label stock on the Roll Arm and push it inward until it touches the Roll Stop .
5. Flip up the Roll Guide and slide it inward until it touches the label stock. The Roll Guide will automatically pull
back slightly to the correct position. There should be approximately a 1mm gap between the Roll Guide and the
roll.
Roll guide
Roll arm
Pressure rollers
Roll stop
Do Not Pinch!