iColor I Candy 200, User Manual

Page: 39 / 72

|
38
User Manual – February 2020 Edition
Top Of Form [TOF]
Increase the Top of form by 0.4mm. This will cause the printer to start printing before the label and ensure a
fully printed label. Some additional adjustment may be necessary if the label was not perfectly aligned to begin
with. See Section 4E.
Note:
It is best to over bleed as little as possible to avoid excess ink on the label backing. Also, over bleeding too much will cause
the printer to skip labels. This is because the printer stops printing too late to sense the next label.
G. Printer driver settings
Once the printer driver has been successfully installed, you will need to setup the driver with the appropriate print
options. Refer to the following steps to change or verify your default printer driver preferences. These settings will
apply to all new designs created in Seagull Scientific BarTender
®
or other programs after the preferences were
changed. Existing labels saved in Seagull Scientific BarTender
®
will not be affected since the preferences are saved
with the label. To change these preferences, you will have to change printer preferences through Seagull Scientific
BarTender
®
. (File Menu - Printer Settings)
To find Driver Settings:
Click the Start button, search for “Printers”.
Select Printers and Scanners.
Select the IColor 200.
Choose Manage.
Select Printing preferences.
1
2 3
Actual label stock
Size = 2
" x 2 "
Increase TOF
Decrease left margin offset
Over bleed page size