IceCure™ Medical Ltd.
DMS-7064 rev. C
ProSense™
Confidential
User Manual
115
European User Manual
Foot pedal (Not available in some regions, e.g. China)
The foot pedal (Not available in some regions, e.g. China) is a pneumatic
accessory,
external to the main chassis and is not essential for normal functioning of the system. It
serves as an alternative way to select actions displayed on the screen, instead of pressing
the active buttons on the screen.
To use the foot pedal (Not available in some regions, e.g. China), connect it to the console
by plugging its cable into the footswitch connector located on the back panel. The foot
pedal action is equal to the action of the optional
BLUE
button.
Temperature sensor (Not available in some regions, e.g. China)
If the user chooses to measure target tissue temperature during cryoablation, the
temperature sensor is a single-use external accessory that can be connected to the main
chassis.
To use the temperature sensor, connect it to the panel connector on the right upper
corner of the chassis, according to instructions detailed in section 3.3.8
–
Temperature
sensor.
Holder (Not available in some regions, e.g. China)
The Holder is a re-usable external accessory that can be used for safely positioning the
hose during cryo procedure in order to ensure stability during the procedure.
It is the consideration of the user on which side and where to position the holder arm
according to the room and table conditions.
To use the holder, safely position the Holder base on the CT table under the patient body
and tighten the nuts to the table. Once positioning of the Cryoprobe is completed, safely
put the hose within the Holder gripper and tighten the locks.
