IBM xSeries 235, Maintenance & Troubleshooting, Page: 62 / 214

Removing the bezel
The following illustration shows how to remove the bezel from the tower model
server.
Note: If you have not already removed the door, remove it as described in
“Removing the server door (tower model)” on page 50.
Bezel-release lever
Complete the following steps to remove the bezel:
1. Review the information in “Installation guidelines” on page 41, “Handling
static-sensitive devices” on page 42, and “Safety information” on page 163.
2. Press up on the bezel-release lever.
3. Pull the top of the bezel away from the chassis; then, lift the bezel to disengage
the bottom tabs.
4. Remove the bezel from the server and store the bezel in a safe place.
52
xSeries 235 Type 8671: Hardware Maintenance Manual and Troubleshooting Guide