IBM xSeries 235, Maintenance & Troubleshooting

Page: 152 / 214

Note: See “System” on page 156 to determine which components should be replaced by a field service technician.
Error code/symptom FRU/action
062 (Three consecutive startup failures
using the default configuration.)
1. Run the Configuration/Setup Utility program.
2. Battery.
3. System board.
4. Microprocessor.
101, 102 (System and processor error)
v System board
106 (System and processor error)
v
System board
111 (Channel check error)
1. Memory DIMM
2. System board
114 (Adapter read-only memory error)
1. Failing adapter.
2. Run diagnostics.
129 (Internal cache error)
1. Microprocessor
2. Optional microprocessor (if installed)
151 (Real time clock error)
1. Run diagnostics.
2. Battery.
3. System board.
161 (Real time clock battery error)
1. Run the Configuration/Setup Utility program.
2. Battery.
3. System board.
162 (Device configuration error)
Note: Be sure to load the default settings
and any additional desired settings; then,
save the configuration .
1. Run the Configuration/Setup Utility program.
2. Battery.
3. Failing device.
4. System board.
163 (Real-time clock error)
1. Run the Configuration/Setup Utility program.
2. Battery.
3. System board.
164 (Memory configuration changed.)
1. Run the Configuration/Setup Utility program.
2. DIMM.
3. System board.
175 (Hardware error)
v System board
176 (Computer cover or cable cover was
removed without a key being used)
1. Run the Configuration/Setup Utility program.
2. System board.
177, 178 (Security hardware error)
1. Run the Configuration/Setup Utility program.
2. System board.
184 (Power-on password damaged)
1. Run the Configuration/Setup Utility program.
2. System board.
185 (Drive startup sequence information
corrupted)
1. Run the Configuration/Setup Utility program.
2. System board.
186 (Security hardware control logic failed) 1.
Run the Configuration/Setup Utility program.
2. System board.
142
xSeries 235 Type 8671: Hardware Maintenance Manual and Troubleshooting Guide