IBM xSeries 235, Maintenance & Troubleshooting

Page: 125 / 214

Operator information panel
Complete the following steps to remove the operator information panel.
Note:
v Read “Installation guidelines” on page 41.
v
Read the safety notices at “Safety information” on page 163.
v Read “Handling electrostatic discharge-sensitive devices” on page 166.
1. Turn off the server and any attached devices.
2. Disconnect all external cables and power cords from the back of the server.
3. Remove the server cover (see “Removing the left-side cover” on page 51).
4. Remove the front bezel (see “Removing the bezel” on page 52).
5. Disconnect and remove adapters and spacers (see “Working with adapters” on
page 56).
6. Remove the two central fans (see “Replacing a hot-swap fan” on page 91).
7. Remove the plastic baffle.
8. Disconnect the operator information panel cable from the system board.
Chapter 5. Service replaceable units
115