IBM xSeries 235, Maintenance & Troubleshooting

Page: 65 / 214

2. Turn off the server and disconnect all power cords and external cables (“Turning
off the server” on page 9); then, remove the server cover (see “Removing the
server left-side cover and bezel (tower model)” on page 51 or “Removing the
server top cover and bezel (rack configuration)” on page 53).
3. Slide the air-baffle assembly out of the guides; then, remove it from the server.
Air-baffle
assembly
4. Disconnect any cables that are connected to the full-length adapters.
5. Lift the adapter-retention clip on top of the adapter-support bracket (for the
location of this clip, see the illustration at “Installing a hot-plug adapter (slots 5
and 6)” on page 59); then, remove the full-length adapters and plastic dividers.
6. Disconnect the end of the cable that is attached to the center fans (connector
J18).
Chapter 4. Customer replaceable units
55