IBM Ultrium Gen 6, Installation And User Manual

Page: 27 / 118

Chapter 2. Tape drive installation
This chapter describes the installation procedures for the tape drive. It is the
customer's responsibility to install this product.
This is a customer setup unit. It is the customer's responsibility to install this
product.
Depending on the type of enclosure or server, installation procedures might vary.
Refer to the enclosure or server documentation for drive installation. The following
generic procedures can be used if the enclosure or server documentation is not
available:
v
“Installing a tape drive” on page 10
Note: Before you install the tape drive, read the information in the following
sections:
v
“Installation guidelines”
v “Handling static-sensitive devices”
v
“Inventory checklist” on page 10
Installation guidelines
Before you remove or replace a device, read the following safety information.
v
Read the safety information in “Safety” on page ix. This information will help
you work safely. Take standard electrostatic discharge precautions when you
work inside the server.
v
Observe good housekeeping in the area where you are working. Place removed
covers and other parts in a safe place.
v Do not attempt to lift an object that you think is too heavy for you. If you have
to lift a heavy object, observe the following precautions:
– Make sure that you can stand safely without slipping.
– Distribute the weight of the object equally between your feet.
– Use a slow lifting force. Never move suddenly or twist when you lift a heavy
object.
– To avoid straining the muscles in your back, lift by standing or by pushing
up with your leg muscles.
v
Make sure that you have an adequate number of properly grounded electrical
outlets for the server and all attached devices.
v
Back up all important data before you make changes to disk drives.
Handling static-sensitive devices
To avoid static electricity damage when handling the drive, use the following
precautions.
v
Limit your movement. Movement can cause static electricity to build around
you.
v
Always handle the drive carefully. Never touch exposed circuitry.
v
Prevent others from touching the drive.
© Copyright IBM Corp. 2013
9