IBM TotalStorage NAS 300, User Reference

Page: 124 / 200

6. Restart the NAS Gateway 300.
7. After the NAS Gateway 300 completes the POST, select 1 -- Update
POST/BIOS from the menu that contains various flash (update) options.
8. When you are asked if you would like to move the current POST/BIOS image
to the backup ROM location, type N .
Attention: Typing Y will copy the corrupted BIOS into the secondary page.
9. When you are asked if you would like to save the current code on a diskette,
select N .
10. You will be asked to select the language that you want to use. Select your
language ( 0 - 7 ) and press Enter to accept your choice. You will be prompted
to remove the diskette and press Enter to restart the system. Remove the
flash diskette from the diskette drive.
11. Shut down (see “Shutting down and powering on the NAS Gateway 300” on
page 87) the NAS Gateway 300.
12. Remove the jumper on the boot-block jumper block, or move it to pins 1 and 2
to return to normal startup mode.
13. Restart the NAS Gateway 300. The NAS Gateway 300 should start up
normally.
110
NAS Gateway 300 User’s Reference