IBM TotalStorage NAS 300, User Reference

Page: 100 / 200

Memory notes
The following sections contain information on adding memory.
Adding more engine memory to increase performance
You can enhance the performance of the NAS Gateway 300 in an NFS environment
by adding more RAM to its processor. To do this:
1. Purchase either of the 5187 memory field-upgrade feature codes from your IBM
representative:
0301 1 GB memory upgrade
0302 2 GB memory upgrade
2. Follow the instructions in Chapter 3, section “Replacing memory modules,” of
the Installation Guide .
3. Before rebooting the appliance, attach a keyboard and display directly to the
rear connectors of the product. During the first IPL, you will have to read and
answer questions about the additional memory you have installed.
Using the Recovery CD-ROM if you have added more processor
memory
If you have installed more processor memory, and later use the Recovery CD-ROM
(see Chapter 9, “Using the Recovery and Supplementary CD-ROMs” on page 111),
you will have to attach a keyboard and display and answer questions about the
additional memory that you have installed.
86
NAS Gateway 300 User’s Reference