IBM System Storage TS3100, Setup, Operator, And Service Manual

Page: 174 / 375

Important:
v
IKE-enabled configurations need a running Racoon2 or StrongSwan
system which is correctly configured to match your policy.
v SPI-enabled configurations need a correct setkey setup.
v
When mixing SPI and IKE-enabled configurations be careful to set
up the right configuration.
Common preferences
v Default policy supports discard and bypass mode.
v
It is not possible to save more than four policies.
Single policy configuring
v
Multiple single addresses per policy are not provided.
v The SPI index has to be between 256 and 10000 for a pure SPI connection.
Configure Library: User Access
This page allows the user to add and modify user accounts. See “Login” on page
2-5 for information on user types.
The Configure Library > User Access page is only accessible to the Admin and
Service login. Access is denied to User and Superuser logins.
The Admin login has access to all library functions except Service Library >
Advance Diagnostics .
The Service login has access to all library functions including Service Library >
Advance Diagnostics .
a77ug298
Figure 5-55. Policy slot setup after saving one policy
5-64
TS3100 Tape Library and TS3200 Tape Library Setup, Operator, and Service Guide
|