IBM System Storage TS3100, Setup, Operator, And Service Manual

Page: 15 / 375

10-4. Library drive sled without ElectroStatic
Discharge (ESD) springs (SCSI sled shown) 10-3
10-5. Library drive sled with ESD springs [1]
(SAS sled shown) .
. . . . . . . . 10-4
10-6. Drive sled components (full high fibre
drive in top position, half high SCSI drive
in middle position, half high SAS drive in
bottom position) on back panel of a 4U
library .
. . . . . . . . . . . . 10-5
10-7. Pulling the drive sled out of the library
(drive sled without ESD springs shown)
. 10-6
10-8. Pushing the drive sled into the library
(drive sled without ESD springs shown)
. 10-7
10-9. Diagrams for applying conductive tape for
ESD protection to the back of a drive sled
installed in a 2U or 4U library .
. . . . 10-8
10-10. 2U Magazine with Slot Blocker 10-10
10-11. Popping the Slot Blocker out of the Cell 10-11
10-12. A power supply being removed from a
2U library . . . . . . . . . . . 10-12
10-13. A Library Controller Card being removed
from the library . . . . . . . . . 10-13
10-14. Magazine fiducial . . . . . . . . . 10-14
10-15. Removing the two mounting bracket
screws anchoring the library to the rack
(one screw on each side of the library) .
. 10-16
10-16. Foot pads installed on the bottom of the
library enclosure . . . . . . . . . 10-17
10-17. Removing the shipping label and lock
from the top of the library and storing on
the rear panel .
. . . . . . . . . 10-18
10-18. Library shipping lock and label storage
location on the real panel of the library . 10-18
10-19. Removing a drive sled from the library
(drive sled without ESD springs shown) . 10-19
10-20. Drive sled taping diagrams . . . . . 10-20
10-21. A power supply being removed from a
library . . . . . . . . . . . . 10-21
10-22. Removing a Library Controller Card from
the library . . . . . . . . . . . 10-23
10-23. Library front panel LEDs . . . . . . 10-24
10-24. Access hole for the left magazine (facing
rear of library) . . . . . . . . . . 10-25
10-25. Access hole for the right magazine (facing
rear of library) . . . . . . . . . . 10-26
10-26. Left magazines pulled out of a 4U library
(facing front of library) . . . . . . . 10-27
10-27. Mounting brackets and anchors for
securing the library in a rack (one bracket
and anchor on each side of the library).
. 10-28
10-28. Front view of a rack showing the rails
installed . . . . . . . . . . . . 10-28
10-29. Proper placement of the Repair
Identification (RID) Tag . . . . . . . 10-29
11-1. Types of Receptacles . . . . . . . . 11-8
A-1. Internal view of the library . . . . . . A-1
A-2. Drive connection card showing screws and
plastic cover .
. . . . . . . . . . A-4
A-3. Half high drive with the connection card
moved to the side showing the screws .
. A-5
A-4. The drive brick showing the cables to be
unplugged.
. . . . . . . . . . . A-5
A-5. Removing the bezel and the cover from the
4U internal drive
. . . . . . . . . A-6
A-6. Removing the bezel and the cover from the
half high internal drive
. . . . . . . A-7
A-7. Using hex wrench to rewind tape into
cartridge .
. . . . . . . . . . . A-8
A-8. Rewinding tape into cartridge . . . . . A-9
A-9. Drive with cover removed to reveal gear
train. .
. . . . . . . . . . . . A-10
A-10. Leader Block Assembly (LBA) . . . . . A-11
A-11. Drive with cover removed to reveal gear
train. .
. . . . . . . . . . . . A-12
A-12. Leader Block Assembly (LBA) A-13
A-13. Using hex wrench to rewind tape into
cartridge . . . . . . . . . . . . A-14
A-14. Rewinding tape into cartridge A-15
A-15. Using hex wrench to rewind tape into
cartridge . . . . . . . . . . . . A-16
A-16. Drive with cover removed to reveal gear
train. . . . . . . . . . . . . . A-17
A-17. Leader Block Assembly (LBA) A-18
A-18. Rewinding tape into cartridge A-19
A-19. Using hex wrench to rewind tape into
cartridge . . . . . . . . . . . . A-20
A-20. Drive with cover removed to reveal gear
train. . . . . . . . . . . . . . A-21
A-21. Leader Block Assembly (LBA) A-22
A-22. Rewinding tape into cartridge A-23
A-23. Drive with cover removed to reveal gear
train. . . . . . . . . . . . . . A-24
A-24. Leader Block Assembly (LBA) A-24
B-1. Configuration of a one - partition system B-4
B-2. Configuration of a two - partition system B-5
B-3. Configuration of a three - partition system B-5
B-4. Configuration of a four - partition system B-6
B-5. Examples of SCSI element addressing B-6
E-1. AIX ERRPT Library Error Log Example E-3
E-2. AIX ERRPT Library Error Log Example E-4
Figures
xiii