IBM Storwize V5000 Gen 2 Series, Quick Installation Manual

Page: 69 / 178

Procedure
1. Slide the release latch ( 1 ) in the direction that is shown in Figure 30 on page 43.
Figure 30. Releasing the 2077-92F cover
2. Slide the cover toward the front of the expansion enclosure ( 2 ), as shown in Figure 30 on page 43.
3. Carefully lift the cover up, as shown in Figure 31 on page 43.
Figure 31. Removing the 2077-92F cover
4. Place the cover in a safe location.
Replace the cover
5. To reinstall the cover, or replace it with one from FRU stock, follow the procedure in “Installing or
replacing the top cover: 2077-92F ” on page 58.
Installing or replacing the support rails: 2077-92F
You must install the support rails before you can install a 2077-92F expansion enclosure in a rack.
Procedure
1. Locate the hardware that is used to install the rails, including the M4xL6 and M5xL13 screws.
Set the hardware, which is shown in Figure 32 on page 44, aside for use later in the installation
process.
Chapter 2. Installing the system hardware 43