IBM Storwize V5000 Gen 2 Series, Quick Installation Manual

Page: 33 / 178

The following figures show the location of the ports that are available at the back of the Storwize V5000
Gen2 control enclosures.
Note: The figures show an enclosure that is equipped with alternating current (AC) power supplies. Some
enclosure models have direct current (DC) power supplies. For more information about DC power supply
units, see “Direct current power supply units” on page 9.
Figure 4 on page 7 shows the Storwize V5010 control enclosure.
Figure 4. Data ports on the rear of the Storwize V5010 control enclosure
Figure 5 on page 7 shows the data ports on the back of the Storwize V5020 control enclosure.
Figure 5. Data ports on the rear of the Storwize V5020 control enclosure
Figure 6 on page 7 shows the data ports on the back of a Storwize V5030 or Storwize V5030F control
enclosure.
Figure 6. Data ports on the rear of the Storwize V5030 or Storwize V5030F control enclosure
• T Technician port
• 1 Ethernet port 1
• 2 Ethernet port 2
• 2/T Ethernet port 2/Technician port
• 3 SAS expansion ports
2U Expansion enclosure components
Figure 7 on page 8 shows the location of the power supply units and expansion canisters.
Chapter 1. Before you begin the installation 7