IBM ServeRAID-4 Ultra160 Series, User Reference

Page: 46 / 208

Updating BIOS and firmware code
Before configuring the ServeRAID controller, you must have the latest BIOS and
firmware code installed on your server.
1. Insert the IBM ServeRAID Support CD into the server CD-ROM drive.
2. Turn on the server. The IBM ServeRAID ROM Update Wizard automatically
starts.
The IBM ServeRAID ROM (read-only memory) Update Wizard is an easy-to-use
program that simplifies updating the BIOS and firmware code on ServeRAID
controllers. The wizard automatically scans and identifies each ServeRAID
controller in your system. After scanning completes and if an update is required,
a report screen opens with the following information:
v
Controller types found.
v
Controller slot number, if known.
v
Firmware version.
v
BIOS version.
v
Update status. If a controller has outdated BIOS or firmware, the IBM
ServeRAID ROM Update Wizard marks the controller as a candidate for
update.
If the BIOS and firmware code do not require updating, the wizard automatically
exits and the ServeRAID Manager program opens. Continue with “Configuring
the ServeRAID controller”.
If the BIOS and firmware code require updating, the IBM ServeRAID ROM
Update Wizard asks if you want to update. You decide whether to update your
controllers, but you must update all the controllers or none (that is, you cannot
selectively update).
3. Click Update. The IBM ServeRAID ROM Update Wizard displays a progress
indicator as it updates the controllers. If the wizard detects an error, it displays
the error message and prompts you to insert a diskette into your diskette drive
so the wizard can save details about the error to a file on the diskette.
If you do not want to update your ServeRAID controllers, click Cancel.
4. When all updates are complete, scroll through the Features window. This
window reports the changes that the IBM ServeRAID ROM Update Wizard
applied to your ServeRAID controllers.
5. Leaving the IBM ServeRAID Support CD in the CD-ROM drive, shut down and
restart the server.
Configuring the ServeRAID controller
This section provides information about starting and using the ServeRAID Manager
program. You can use the ServeRAID Manager program to configure your
ServeRAID controllers, view the ServeRAID configuration and associated devices,
create arrays and logical drives, delete an array, dynamically increase the
logical-drive size, change RAID levels, and much more.
The information in this section is an overview of the ServeRAID Manager program
and its capabilities. For instructions on specific processes using the ServeRAID
Manager program, refer to the ServeRAID Manager online help. For information on
RAID levels, refer to “Chapter 3. Understanding RAID technology” on page 15.
28
IBM
®
User’s Reference: ServeRAID
™
-4 Ultra160 SCSI Controller