IBM ServeRAID-4 Ultra160 Series User Reference Download Page 31

Page: 31 / 208

Connecting external devices

Note: The ServeRAID-4 controllers do not support configurations that use both the

internal and external connectors on the same channel concurrently. For
example, you cannot use both external Channel 1 and internal Channel 1.

To attach SCSI devices to an external channel connector on the ServeRAID
controller:

1. Connect one end of a 68-pin very-high-density connector interface (VHDCI)

SCSI cable to an external channel connector on the ServeRAID controller.

Note: See “Connector locations” on page 4 for the channel connector locations.

2. Connect the other end of the SCSI cable to the external SCSI device.

3. Go to “Updating BIOS and firmware code” on page 28.

Figure 7. Connecting a ServeRAID-4H controller external channel connector

Chapter 2. Installing and cabling a ServeRAID controller

Summary of Contents for ServeRAID-4 Ultra160 Series
















































































































































































































Search results

Summary of Contents for ServeRAID-4 Ultra160 Series

Reviews:

Related manuals for ServeRAID-4 Ultra160 Series

Brands by name

Popular brands

IBM ServeRAID-4 Ultra160 Series, User Reference

Search results

Summary of Contents for ServeRAID-4 Ultra160 Series

Reviews:

Related manuals for ServeRAID-4 Ultra160 Series

Brands by name

Popular brands