IBM ServeRAID-4 Ultra160 Series, User Reference

Page: 162 / 208

BCS ECS Explanation Action
03 88 A drive was imported from another server and it
has a valid configuration, and the
Online/Rebuild drives are not responding. To correct the problem:
1. To keep the previous configuration in the
controller, replace the physical drives that were
switched and press F4 to retry.
2. To accept the new configuration from the
physical drives, press F7.
Attention: Completing this step might result
in a loss of the original configuration and data
on the drives.
3. If all the physical drives are present and
connected correctly, one or more of the drives
might be faulty. Identify and replace the faulty
drives; then, press F5 to accept the changes.
To exit without making changes, press F10.
03 98 A drive was imported from another server and it
has a valid configuration, and the
Online/Rebuild and Hot Spare/Standby
Hot-Spare drives are not responding.
03 A8 A drive was imported from another server and it
has a valid configuration, and the
Online/Rebuild and Ready/Standby drives are
not responding.
03 B8 A drive was imported from another server and it
has a valid configuration, and the
Online/Rebuild, Hot-Spare/Standby Hot-Spare,
and Ready/Standby drives are not responding.
03 C8 A drive was imported from another server and it
has a valid configuration, and the
Online/Rebuild drives are not responding and
unidentified drives were found.
03 D8 A drive was imported from another server and it
has a valid configuration, and the
Online/Rebuild and Hot-Spare/Standby
Hot-Spare drives are not responding and
unidentified drives were found.
03 E8 A drive was imported from another server and it
has a valid configuration, and the
Online/Rebuild and Ready/Standby drives are
not responding and unidentified drives were
found.
03 F8 A drive was imported from another server and it
has a valid configuration, and the
Online/Rebuild, Hot-Spare/Standby Hot-Spare,
and Ready/Standby drives are not responding
and unidentified drives were found.
07 00 The specified drive is not responding. To correct the problem:
1. If the specified physical drive or drives are in an
external enclosure, check to make sure that the
enclosure is turned on. If the enclosure is not
turned on, turn on the power and press F4 to
retry.
2. Download and install the latest version of IBM
ServeRAID software. See “Chapter 16.
Obtaining ServeRAID updates” on page 131 for
more information.
3. Replace the failed physical drive or drives.
07 08 The specified drives are not responding.
144
IBM
®
User’s Reference: ServeRAID
™
-4 Ultra160 SCSI Controller