Locations
This section contains the following:
“Fibre Channel Hub Rack Installation.”
“Installing the GBIC” on page 14.
“Removing the GBIC” on page 15.
Fibre Channel Hub Rack Installation
The Fibre Channel Hub comes with a tray and bezel for
installation in a rack.
Note
Also use this procedure to assist in removing the Fibre
Channel Hub from a rack shelf.
To install the Fibre Channel Hub in the rack:
1. Turn the hub upside down and place it on a flat
surface.
2. Turn the tray upside down and place it on the hub.
3. Align the four holes in the tray with the holes in the
hub. Line up the back lip of the tray with the back
side of the hub.
4. Using a Philips head screw driver, install the four
smaller screws in the aligned holes.
5. Turn the tray over so that the hub is on top of the
tray.
12
IBM Netfinity Fibre Channel HMM
Summary of Contents for Netfinity Series
