![background image](http://html2.mh-extra.com/html/ibm/netfinity-series/netfinity-series_hardware-maintenance-manual_3998349023.webp)
6. Find the rack position into which you are installing the
Fibre Channel Hub; then, take four clip nuts and
install them in the rear of the rack. Make sure you
have installed one in each screw hole you will be
using for the tray installation.
If the rack has square holes, snap the M6 clip nuts
into place on the rear of the rack.
If the rack has round holes, slide the 10-32 clip nuts
into place on the rear of the rack.
7. Pick up the tray and line up the top and bottom screw
holes with the clip nuts on the rack. While holding
the tray in place, install four of the larger screws.
If the rack has square holes and you used the M6 clip
nuts, use the M6 hex washer headed screws.
If the rack has round holes and you used the 10-32
clip nuts, use the 10-32 hex washer headed screws.
8. Install the remaining four nut clips in the front of the
rack. Be sure to line them up opposite the hub and
tray.
Type 3523 Fibre Channel Hub and GBIC
13
Summary of Contents for Netfinity Series
