2. Insert the cables into the GBIC.
If the GBIC you are installing has a metal latch, move
the latch to the unlocked (center) position
.1/
. Slide
the GBIC
.2/
into the port, then move the GBIC latch
back to the locked position (flush with the rear of the
GBIC). Connect the fibre optic cable
.3/
to the
installed GBIC.
If the GBIC you are installing does not have a metal
latch, slide the GBIC
.2/
into the port. Connect the
fibre-optic cable
.3/
to the installed GBIC.
For cable management information, go to
http://www.pc.ibm.com/support/ on the World Wide Web.
Removing the GBIC
To remove a GBIC that does not have a metal latch from
the hub port:
1. Press the opposing tabs on the GBIC toward each
other while slowly removing the module from the hub
(with the fiber optic cables still installed).
2. Remove the cable assembly from the GBIC.
To remove a GBIC that has a metal latch from the hub
port: (Refer to the artwork shown in “Installing the GBIC”
on page 14.)
1. Remove the fiber optic cable assembly from the
GBIC.
2. Move the latch to the unlocked (center) position.
3. Press the opposing tabs on the GBIC toward each
other while slowly removing it from the port.
Type 3523 Fibre Channel Hub and GBIC
15
Summary of Contents for Netfinity Series
