![background image](http://html2.mh-extra.com/html/ibm/netfinity-series/netfinity-series_hardware-maintenance-manual_3998349053.webp)
Power Supply Removal
Removing the power supply CRU:
1. Power-off the power supply CRU.
2. Disconnect the power cord from the power supply
CRU.
3. Pull the pull ring lever up to unlatch the CRU.
4. Pull the CRU out of the controller unit.
Installing the power supply CRU:
1. Install the new power supply CRU into the controller
unit.
2. The lever will snap down when the CRU is seated
properly in the chassis. If the lever remains up, push
on the power supply CRU until the lever snaps into
place.
3. Connect the power cord, power-on the controller unit
and check all LEDs.
Power Supply Fan Removal
Type 3526 Fibre Channel RAID Controller
43
Summary of Contents for Netfinity Series
