![background image](http://html2.mh-extra.com/html/ibm/netfinity-series/netfinity-series_hardware-maintenance-manual_3998349019.webp)
Additional Service Information
Applications and Configurations
The Fibre Channel Hub modular interface provides
flexibility and is upgradable to available short-wave and
long-wave optical Fibre Channel product port interfaces.
Fibre Channel products that are commonly interconnected
to the Fibre Channel Hub are Fibre Channel host bus
adapters, FC-AL storage devices, and FC-AL storage
arrays. SCSI initiators (workstations and servers) set up
and initiate the transfer of data to or from the storage
devices. The storage devices that receive the requests
made by the SCSI initiators are the SCSI targets. Initiators
and targets represent individual nodes that are linked by
the shared FC-AL.
Power On Systems Check - Fibre
Channel Hub
Power-on the storage modules first, then the controller and
the Fibre Channel Hub, then everything else.
Note
Make sure the Fibre Channel Hub is powered on
before the host adapter to insure proper loop
initialization.
To insure proper operation:
1. Connect the power cord to the Fibre Channel Hub,
then to the electrical outlet.
Power Connector
2. Power-on the attached FC-AL compatible nodes.
Type 3523 Fibre Channel Hub and GBIC
9
Summary of Contents for Netfinity Series
