![background image](http://html2.mh-extra.com/html/ibm/netfinity-series/netfinity-series_hardware-maintenance-manual_3998349044.webp)
that allow you to set ID numbers 0 through 127 for
each controller. The factory default settings are ID #5
for Controller A and ID #4 for controller B.
Software algorithms that calculate the actual Fibre
Channel address, based on the controller unit's
hardware settings and position on the loop or hub.
Note
This is the preferred ID that will be assigned on the
Fibre Channel loop unless it is already being used. If
the ID is already in use, a soft ID will be assigned.
Fibre Channel Host Cable Requirements
For the Type 3526 Fibre Channel RAID Controller, you
must use multi-mode, 50 micrometer fiber optic cable and
a Media Interface Adapter (MIA).
Cable
Media
Type
Data
Size
Transfer
Speed
Range
Fiber
optic
(multi-mode,
50
micrometer)
Short-
wave
laser
100
MB/sec
1062.5
Mbaud
up to
500 m
34
IBM Netfinity Fibre Channel HMM
Summary of Contents for Netfinity Series
