Rack Installation
Note
Before removing or placing the controller unit in the
rack, carefully remove the battery from the controller
unit. See “Battery Replacement” on page 44.
1. Loosen the adjustment screws on both side rails and
adjust to fit the rack.
2. Secure the side rails to the rack cabinet using eight
M6 screws and eight rack mounting nuts. Make sure
both side rails are parallel and level to one another in
the rack cabinet.
3. Tighten the rail adjustment screws.
4. Once the side rails are secured to the rack, carefully
slide the controller unit onto the side rails.
5. Secure the controller unit with two screws on the front
sides of the battery compartment.
46
IBM Netfinity Fibre Channel HMM
Summary of Contents for Netfinity Series
