manualshive.com logo in svg

IBM InfoPrint 6700 Series, User Manual

Share
Download
IBM InfoPrint 6700 Series User Manual Download Page 305

USB

305

Program Download

Normally the Host communicates with the printer’s USB port with a Windows 
Driver. The Windows Driver cannot be used to transfer binary data to the 
printer, such as the data contained in a Program Download. To do a Program 
Download through the USB Port perform the following steps:

1.

Make the printer sharable on the Host PC. This is done through the 
Printer Setting Window on the PC. Make note of the Printers Shared 
name.

2.

Open a Dos Window on the PC. At the command prompt type:

NET USE LPT1\\COMP_NAME\Printers_Shared_Name /Persistent:YES

This command should be all on the same line. It redirects output on LPT1 
to the shared printer.

COMP_NAME is the computer name found on the system settings.

Printers_Shared_Name is the shared name found in the printer 
Properties\Sharing tab.

3.

To check status of connection type:

Net View \\COMP_NAME

COMP_NAME is the computer name found on the system settings.

Now the printer is ready.

4.

Use the COPY command to send the program file to the printer. Type:

COPY /b <File Name> lpt1:

5.

To stop using LPT1 for USB, type:

NET USE LPT1 /DELETE

Summary of Contents for InfoPrint 6700 Series

































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands