manualshive.com logo in svg

IBM InfoPrint 6700 Series, User Manual

Share
Download
IBM InfoPrint 6700 Series User Manual Download Page 218

218

Chapter

3

Emulation Submenus

ESC d command

(From page 196.) This item is for backward compatibility.

•

Even dot plot

. This option interprets the ESC d command as even dot 

plot.

•

Double high

. This option interprets the ESC d command as double high. 

Select this option for backward compatibility.

The factory default is Even dot plot.

EVFU Select

(From page 191, page 194.) Controls how the printer handles vertical 
formatting.

•

Enable

. Selects P-Series compatible Electronic Vertical Format Unit 

(EVFU).

•

Disable

. Disables all EVFU processing.

The factory default is Enable.

Expanded Font (PGL)

(From page 185.) Expanded font allows you to print characters in different 
sizes with specified parameters and to select which font face to use.

•

Scalable

. Uses scalable fonts.

•

Block

. Uses block fonts.

•

Alt Block 1

. Uses alternative block fonts with a different character set.

The factory default is Scalable.

Expanded Font (VGL)

(From page 188.) Expanded font allows you to print characters in different 
sizes with specified parameters and allows you to select block or non-block 
font face.

•

Scalable

. Uses Gothic font

 

as default. Other font faces can be selected 

by using the IFONT command.

•

Block

. Uses Block font.

The factory default is Scalable.

Summary of Contents for InfoPrint 6700 Series

































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands