manualshive.com logo in svg

IBM InfoPrint 6700 Series, User Manual

Share
Download
IBM InfoPrint 6700 Series User Manual Download Page 285

KERBEROS PARAMS Submenus

285

Tckt Life Units

Ticket lifetime unit in Seconds, Minutes, Hours, or Days.

The factory default is Seconds.

Tckt Life (SEC)

Sets the maximum allowable amount of time in Seconds (SEC), Minutes 
(MIN), Hours (HR), or Days (DAY), as specified by the Tckt Life Units, that a 
ticket obtained from the Kerberos server is valid before getting a new one.

•

Seconds:

 The range is 300-259200, and the default is 43200.

•

Minutes:

 The range is 5-4320, and the default is 720.

•

Hours:

 The range is 1-72, and the default is 12.

•

Days:

 The range is 1-3, and the default is 1.

NOTE:

Whatever submenu is selected in Tckt Life Units will display on the 
Tckt Life (SEC) menu. For example, if you select Hours, the Tckt Life 
(SEC) menu name will change to Tckt Life (HR).

Renew Life Units

Renew lifetime unit in Seconds, Minutes, Hours, or Days.

The factory default is Seconds.

Renew Life (SEC)

Sets the maximum allowable amount of time in Seconds (SEC), Minutes 
(MIN), Hours (HR) or Days (DAY), as specified by the Renew Life Units, 
before warning that a new Kerberos password is needed.

•

Seconds:

 The range is 0-604800, and the default is 0.

•

Minutes:

 The range is 0-10080, and the default is 0.

•

Hours:

 The range is 0-168, and the default is 0.

•

Days:

 The range is 0-7, and the default is 0.

NOTE:

Whatever submenu is selected in Renew Life Units will display on the 
Renew Life (SEC) menu. For example, if you select Days, the Renew 
Life (SEC) menu name will change to Renew Life (DAY).

Summary of Contents for InfoPrint 6700 Series

































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands